Small like a flea...

is our mini atomizer. Recently our developer Bernd Heise lost track of the newly developed prototype and had to search for days on end. Fortunately the atomizer turned up again so you can install it in the smallest of spaces. But be careful! Do not misplace this mini atomizer - you will have a very hard finding it again. But, if all is lost you can always order another one - we have plenty of them in stock.
An adjustment screw on the atomizer head controls the fluid quantity, the air intake can be adjusted with the choke valve on the pneumatic hose.



Function:
The atomizer should always be installed slightly above the max. fluid level inside the tank. Atomizing starts as soon as compressed air is fed (an installed return valve [vertical installation] inside the hose prevents the fluid from descending). The atomizer operates continuously or cyclically with a 2/2-way valve, optionally also with Blow Unit BA - but always with properly dosed quantities. The fluid is fed economically and clean at the center of the air blast. The quantities of air and fluid can be fine-adjusted with the air and fluid choke valve (see photograph).

Measuring examples of suction volumes in 1 min. at 20 ° C:
ISOVG150 2.0 ml at 6 bar
ISOVG150 1.5 ml at 3 bar
Water 36 ml at 6 bar
Water 30 ml at 3 bar