Everything here functions without expensive electronics.
The pure compressed air controls make the unit significantly more reasonable in price - 50 % less !
You can dose everything: Adhesives, soldering paste, water, oil, Silicone, etc.
Vacuum power helps dosing thin fluids and to prevent excess dripping. This feature is integrated as well - with a fine-adjustment option. All you need is compressed air at a pressure of approx. 4 bar. The timing for the air blast that determines the drop size can be adjusted with the time and pressure controllers. Once adjusted the preset quantity is dispensed if the pneumatic foot switch is activated.
Our mission:
Simplifying things with compressed air - this makes operations uncomplicated, reasonably priced, and functional!
The simple principle:
You only need compressed air at a pressure of approx. 4 bar.
The timing for the air blast that determines the drop size can be adjusted with the time (Time) and pressure controllers (P). Once adjusted the preset quantity is dispensed when the pneumatic foot switch is activated. Dosing thin liquids requires vacuum power to prevent excess dripping.
This feature is integrated as well - with a fine-adjustment.
Your advantages:
Simply connect 4 bar of compressed air and the unit is ready for operation.
The simple design makes the unit reasonable in price and service-friendly. The simple operation saves time.
Try it out - free of charge.
We deliver 10 days on trial !
Dosing system table unit with pressure, time, vacuum controller, and foot switch
| Controls: |  |
Pneumatic (4 bar) |
| Operating pressure: | 3 - 6 bar | |
| Drip. pressure regul.: | 0 - 2 bar adjustable | |
| Weight: | 2,400 g | |
| Dimens. (W x H x D): | 210 x 150 x 110 mm |
We recommend an air filter for the unit.
| D-TG200 |
Test set
with 1 cartridge 30 cm³, 1 adapter 30 cm³, 8 different needles, 1 closing cap
| D-PS |
