- For environmentally safe and targeted lubrication
Targeted lubrication in hard to access locations... often only a single drop of oil is needed in the right spot.
The oil gun sprays with precision up to a distance of 1 m (depending on viscosity and pulse frequency). Its area of application - wherever there is little space and cleanliness is a must.
Each drop reaches its target. So, lubricating can be economical and free of health hazards (without oily mist).
| Viscosity: |  |
10 - 150 mm2/sec. (medium oils) without adhesives, without solids. |
| Operating temperature: | -25 °C...+80 °C | |
| Max. clock speed: | 160/min. (measured at a viscosity of 150 mm2/sec.) |
For use of media containing alcohol we recommend the model with Viton-seals.
Order-No: OS-BP/V
How it works:
The pneumatic operating pressure is 4 - 8 bar. The function is actuated by a 3/2 way-valve (Order-No. MV26-3218-30 (=24 VDC) or MV26-3218-06 (=230 VAC)). The pump container has to be installed vertically, as shown. The oil is pressed through a pressure cylinder into the lines at an approx. pressure of 50 bar. The oil is released by the dosing valve. All parts are ready to connect at the time of delivery, only the hoses (Order-No. S-PA4 - refer to the chart) must be ordered, cut, and installed as needed.
A max. expansion for up to 8 lubricating points is possible with 2 V4-distributors.
A V1-distributor preceeds each dosing valve. The quantity for the dosing valves is fix-adjusted and cannot be changed. If necessary, they can be replaced.
Remark: With increasing viscosity, reach and cycle frequency will decrease.
*) Matching brushes for surface atomizing >>>
Order example for 2 lubricating points:
1 OS-BP + 1 OS-V4 + 2 OS-V1 + 2 OS10 + 5 m S-PA4
Remark:
Before intial start-up the system must be vented several times, until it is free of air bubbles.
1) 1.2 liter tank
2) Venting
3) Venting holes for oil level monitoring
4) Mounting bracket with holes 2 x ø9, distance 70 mm
Lubricating points on the V4-distributor which are not in use have to be closed (suitable blind plugs are included in the delivery).
Technical drawings:
Drawing OS-BP4,5 >>>
Drawing OS-BP >>>
Drawing V1 >>>
Drawing V4 >>>
Drawing V1 + OS >>>
Drawing OS-S1,5 + OS-S4,5 >>>
