R O L L E R   O I L E R

- To oil belts and boards

Belts and boards must be oiled to maximize tool life. The roller oiler has two felt rollers that are lubricated separately. The oil is ­distributed evenly over the entire roller length by a perforated hollow shaft (refer to the diagram). The felt rollers have ball bearings and can be replaced if worn.
The springs on the side ensure a uniform pressure on the felt ­rollers, even for different sheet metal thicknesses.
All roller oilers are suitable for use with the BMT-dosing unit.

1) Spring - Order-No.: E–FZ-FR...
2) Felt roller
3) Steel housing
4) Oil infeed
5) S-PVC5
6) Hollow shaft - Order-No.: E-HW-FR...
7) Drip chamber - Order-No.: ESG
8) Axle - Order-No.: E-AX-FR...









Order-No.
Dimension
A
Dimension
B
Dimension
C
Dimension
D
Dimension
E
Max.
housing thicknes
FR50M 65 37 50 75 42 1 mm
FR100M 115 37 100 75 42 1 mm
FR150M 165 37 150 75 42 1 mm
FR75 95 70 75 140 95 4 mm
FR150 170 70 150 140 95 4 mm
FR225 249 70 225 140 95 4 mm
FR300 320 70 300 140 95 4 mm
FR450 470 70 450 140 95 4 mm
FR600V 664 80 600 205 100 4 mm
FR700V 764 80 700 205 100 4 mm
ESG Drip chamber

Flow speed: max. 300 m/min.
Viscosity at 40 °C: 100 - 150 mm²/sec.
Replacement rollers can be ordered. Instead of "FR", add "EF" to the Order-No.
Order example: EF50M

Order-No.
EF50M
EF75
EF100M
EF150
EF150M
EF225
EF300
EF450
EF600
EF700