T A N K   W I T H   L E V E L   S W I T C H

The filling level inside a tank can be tested with level switch. Both versions of the switch (nylon and polypropylene) are either available separately or included with the tank. For the tank dimensions, refer to the BMT on either the front page or the following page. Model B-SS10 is perfectly suitable for oil infeed to our atomizer ZMIN. The switch can also be used for minimum or maximum display. The switch function can be reversed by simply turning the switch by 180°.

Fig. 1 = NO open
Fig. 2 = NC closed
Mounting: Circular array Ø 22 mm, wall thickness 0.5 - 4 mm

Technical data for level switch SS10PA and SS10PP
(SS10 is no longer available)

SS10PA SS10PP
Min. switching dens. med.: 0,65 g/ccm 0,55 g/ccm
Operating temperature: -40 °C...+120 °C -40 °C...+105 °C
Max. operating pressure:     3,5 bar 3,5 bar
Power input:

20 VA
(max. 0,5 A, 240 VAC)

20 VA
(max. 0,5 A, 240 VAC)
Floater stroke: 53 mm 53 mm
Protection type:     IP65 IP65
Weight:     90 g 90 g
Material: Nylon (PA); not for long term usage in water Polypropylene (PP); not to use with mineral oil


















Order-No. Description
B-SS10* Tank "B" 10 l, with level switch
B01E-SS10 Tank square 1 l, with level switch
B01E/02-SS10* Tank square 1 l, with level switch + hose connection 6 x 4
B05-SS10* Tank 5 l, with level switch
B10-SS10* Tank B10, 10 l, with level switch
B20-SS10* Tank B20, 20 l, with level switch
B05-SS10*/SD Tank 5 l, with level switch + hose infeed
B10-SS10*/SD Tank 10 l, with level switch + hose infeed
B20-SS10*/SD Tank 20 l, with level switch + hose infeed
SS10PA Level switch, nylon.
Not for long term usage in water!
SS10PP Level switch, polypropylene.
Don't use with mineral oil!
* Please complete with material code "PA" or "PP"

B-SS10* and B01E/02-SS10* are suitable for minimal atomizer