M I N I M A L   A T O M I Z E R   –   Z M I N / Z M I N - V 6 0 / Z M I N - M S

- With or without metal hose
-
For thing liquids
- Minimal lubrication/fine atomizing

The compact, economical atomizer, or

"The micro-fine oil film“"
This atomizer has a simple construction for dependable function.
With its compact design (95 x 35 x 32 mm) it fits into just about any space, even if things get tight.

All good things come from above:
The oil is not suctioned, but fed in from the top. Thus, very little air is needed. An oil shut-off valve is installed inside the atomizer. As soon as the atomizer receives compressed air, the oil valve opens up and the dosed oil is applied simultaneously.
The minimal-atomizer ZMIN has a built-in fluid shut-off valve. It only switches to flow when compressed air is actually available and blocks the fluid infeed immediately when the compressed air is interrupted. This simplifies control, because a reaction only takes place in dependence of the compressed air, e.g. via our 3/2 way valve (see below).
The fluid is simply fed in from above (e.g. through the connection with the container). So the ZMIN can operate with very little air.
The spray pattern can be adjusted on the atomizer and the fluid inductor.
The more atomized air, the finer the droplets.


Technical data:
Material:

Anodized aluminum, nickel-plated brass,
seals PTFE + 25 % carbon, NBR

Operating pressure: 5 - 8 bar
Environmental temp.: -25 °C... +80 °C
Viscosity range: 1 - 150 mm2/sec. at 20 °C
Max. cycle frequency: 60/min.
Spray angle: 30°
Max. air consumpt.: 58 l norm./min.
SSound level: 75 dB/with metal hose: 76 dB








Spray pattern – fluid H2O


ZMIN Measuring example for fluid volumes, 1 min. at 20 °C :
ISOVG150 0.9 ml at 5.5 bar/atomized air 50 % open
1.0 ml at 5.5 bar/atomized air 100 % open
Water 42 ml at 5.5 bar/atomized air 50 % open
54 ml at 5.5 bar/atomized air 100 % open






Order-No. Model versions
ZMIN without metal hose
ZMIN-V60 extended nozzle, 60 mm




ZMIN-MS - the movable one:
With its flexible stainless steel hose the atomizer ZMIN-MS can be twisted and turned as desired.

Matching accessories for ZMIN; ZMIN-V60 and ZMIN-MS – please order separately:

3/2 way valve:

MV26-3218-30 (= 24 VDC) or.
MV26-3218-06 (= 230 VAC)

Pneumatic hose: S-PU4
Fluid hose: S-PVC4 / S-PUN4
1-litre fluid tank: B01R/01 (incl. hose attachment and mounting option)
1-litre fluid tank
with floater switch:
B01E/02-SSIO PA (suitable for oil)
B01E/02-SS10 PP (suitable for water)
(incl. hose attachment and mounting option)
10-litre fluid tank
with float switch:
B-SS10 PA (suitable for oil)
B-SS10 PP (suitable for water)
(incl. hose attachment and mounting option)


ZMIN-MS Measuring example for fluid volumes, 1 min. at 20 °C:
ISOVG150 0.5 ml at 5.5 bar/atomized air 50 % open
0.5 ml at 5.5 bar/atomized air 100 % open
Water 25 ml at 5.5 bar/atomized air 50 % open
20 ml at 5.5 bar/atomized air 100 % open










Order-No. Model versions
ZMIN–MS with metal hose, 232 mm
EZMIN–MS metal hose mounted as add-on or replacement