Skip to main content Skip to search Skip to main navigation

Cutting ring fitting OS-VT

Oil shooter - OS

- for environmentally friendly and targeted lubrication
Targeted lubrication in inaccessible places... often only one drop is needed in the right place. The oil shooter sprays up to 1 m away (depending on viscosity and cycle frequency). It can be used wherever space is tight and clean. Every drop reaches its target. This means that lubrication can be economical and can be carried out without harming health (without oil mist).
The function:
The pneumatic operating pressure is 4 - 8 bar. The function is triggered via a 3/2-way valve (order no. MV26-3218-30 (= 24 VDC) or MV26-3218-06 (= 230 VAC)). The pump container must be installed vertically as shown. Here, the oil is pressed into the lines via a pressure cylinder at a pressure of up to approx. 50 bar. The oil quantity is released by the metering valve (5 - 100 mm³). Everything is supplied ready for connection, only the hoses (order no. S-PA4 - see table) have to be ordered, cut to length and screwed in according to your requirements. The maximum extension to up to 8 lubrication points is possible with 2 V4 distributors. One V1 distributor is placed in front of each metering valve to bleed the supply line. The metering valves have fixed metering quantities and are not adjustable. They can be replaced as required.

Type: Cutting ring fitting
Temperature min. [C°]: -25
Temperature max. [C°]: 80
Connection: T-Stück
Description: T-cutting ring fitting
Material: Galvanized steel
Viscosity range: 10 - 150 mm²/sec (mittlere Öle)
Max. Cycle frequency per min.: 160
Product number: OS-VT
EAN: 4255910813646
Type: Cutting ring fitting
Temperature min. [C°]: -25
Temperature max. [C°]: 80
Connection: T-Stück
Description: T-cutting ring fitting
Material: Galvanized steel
Viscosity range: 10 - 150 mm²/sec (mittlere Öle)
Max. Cycle frequency per min.: 160
Product number: OS-VT
EAN: 4255910813646

Ersatzteile OS-VT

Replacement cutting ring for screw connection OS-VSR

OS-VSR

Oil shooter - OS- for environmentally friendly and targeted lubricationTargeted lubrication in inaccessible places... often only one drop is needed in the right place. The oil shooter sprays up to 1 m away (depending on viscosity and cycle frequency). It can be used wherever space is tight and clean. Every drop reaches its target. This means that lubrication can be economical and can be carried out without harming health (without oil mist). The function:The pneumatic operating pressure is 4 - 8 bar. The function is triggered via a 3/2-way valve (order no. MV26-3218-30 (= 24 VDC) or MV26-3218-06 (= 230 VAC)). The pump container must be installed vertically as shown. Here, the oil is pressed into the lines via a pressure cylinder at a pressure of up to approx. 50 bar. The oil quantity is released by the metering valve (5 - 100 mm³). Everything is supplied ready for connection, only the hoses (order no. S-PA4 - see table) have to be ordered, cut to length and screwed in according to your requirements. The maximum extension to up to 8 lubrication points is possible with 2 V4 distributors. One V1 distributor is placed in front of each metering valve to bleed the supply line. The metering valves have fixed metering quantities and are not adjustable. They can be replaced as required.
€0.62*
Loading...
Upload in progress, please be patient ...