Silencer ST16FC
€0.00*
ST16FC
Price on request
It hisses...when compressed air is released. The remedy is the silencer. The exclusive “whisper silencers” made of nylon or aluminum reduce the noise level to a more pleasant level.
The aluminum version is open throughout and enables the transport of solid and liquid media.Miscellaneous:All data measured at: 5.5 bar operating pressure - Operating temperature: -10 °C...+80 °C
Silencer ST4A-2
€0.00*
ST4A-2
Price on request
It hisses...when compressed air is released. The remedy is the silencer. The exclusive “whisper silencers” made of nylon or aluminum reduce the noise level to a more pleasant level.
The aluminum version is open throughout and enables the transport of solid and liquid media.Miscellaneous:All data measured at: 5.5 bar operating pressure - Operating temperature: -10 °C...+80 °C
Silencer ST8B
€0.00*
ST8B
Price on request
It hisses...when compressed air is released. The remedy is the silencer. The exclusive “whisper silencers” made of nylon or aluminum reduce the noise level to a more pleasant level.
The aluminum version is open throughout and enables the transport of solid and liquid media.Miscellaneous:All data measured at: 5.5 bar operating pressure - Operating temperature: -10 °C...+80 °C
Vacuum generator VG1/8
€25.82*
VG1/8
Vacuum generator - compact and super affordableIf you have compressed air, you now also have vacuum! No more expensive vacuum pumps. A super injector ensures an improbable suction capacity. At 6 bar, only 13 standard liters/min. compressed air and 0.8 bar negative pressure is generated. This corresponds to 10 liters of vacuum volume per minute.You can install the VGM5 directly in the hose line. It could hardly be simpler or smaller! The VG1/8 with the same internal volume provides the same performance. Clever and space-saving, it conjures up a vacuum from your compressed air. You can leave it hanging freely between hoses or attach it with a hose clamp.Nickel-plated brass housing.
Bellows suction rubber 2.5 folds SRN14
€6.19*
SRN14
Durchmesser D in mm:
14
|
Material:
Perbunan
Who likes wrinkles? But here with the suction cups, they are desirable and ensure height compensation and a good fit. The workpiece is sucked up by the “Z” working stroke. This may save an additional lifting cylinder. The bellows suction pads are available in oil-resistant Perbunan (NBR, black), temperature-resistant food-safe silicone (up to +200 °C, white transparent) or natural rubber (gray) with a soft consistency of 45 Shore, especially for uneven, problematic surfaces. The suction rubbers are simply attached to the adapters or vacuum generators.
Variants from €5.83*
Bellows suction rubber 1.5 folds SHK16
€7.02*
SHK16
Durchmesser D in mm:
16
|
Material:
Rubber
Who likes wrinkles? But here with the suction cups, they are desirable and ensure height compensation and a good fit. The workpiece is sucked up by the “Z” working stroke. This may save an additional lifting cylinder. The bellows suction pads are available in oil-resistant Perbunan (NBR, black), temperature-resistant food-safe silicone (up to +200 °C, white-transparent) or natural rubber (gray) with a soft consistency of 45 Shore, especially for uneven, problematic surfaces. The suction rubbers are simply attached to the adapters or vacuum generators.
Variants from €4.52*
Suction rubber SGT80
€27.73*
SGT80
Diameter D mm:
80
|
Material:
HighTemp HT
Suction pads lift, grip and transport workpieces. Our suction pads are available in oil-resistant Perbunan (NBR, black) or temperature-resistant food-safe silicone (up to +200 °C, white-transparent). They are simply plugged onto the adapter or the vacuum generator. The SV vacuum generator generates vacuum from compressed air. Suction and release are instantaneous. If several suction cups are used, this system offers particular safety, as each suction cup has its own vacuum generator.We recommend this cost-effective solution especially for short cycle times.
Variants from €2.68*
Vulkollan absorbent rubber SGV80
€52.35*
SGV80
Durchmesser D in mm:
81,5
|
Material:
Vulkollan
The Methuselah sucker...made of highly wear-resistant high-tech elastomer has a life expectancy and durability that is 20 times longer than that of “standard suction cups”. This enables longer maintenance intervals and saves you a lot of time and money. Ideal for high cycle rates in multi-shift operation and for (virtually) maintenance-free machine installations in distant countries. The hard-working SGV excels in extreme applications in harsh environments, e.g. in the wood and paper industry or in metal and sheet metal processing.The SGVs are simply plugged onto the adapters or vacuum generators. The SV vacuum generator generates vacuum from compressed air. Suction and release are instantaneous. If several suction cups are used, this system offers particular safety, as each suction cup has its own vacuum generator. We particularly recommend this cost-effective solution for short cycle times
Variants from €24.04*
Suction rubber for films and papers SPK20
€10.00*
SPK20
Durchmesser D in mm:
20
|
Material:
Natural rubber
The paper collector...also cuts a fine figure with foils, veneers and other flat workpieces - because its fine sealing lip and inner “support corset” adapt precisely to flat surfaces, with an anti-crease guarantee. It even handles highly sensitive solar cells and computer components gently and safely. Available in natural rubber with a soft 40 Shore or in heat-resistant silicone (50 Shore). The SPKs are simply attached to the adapters or vacuum generators. The SV vacuum generator generates vacuum from compressed air. Suction and release are instantaneous. If several suction cups are used, this system offers particular safety, as each suction cup has its own vacuum generator. We recommend this cost-effective solution especially for short cycle times.
Variants from €8.57*
Vacuum pressure gauge PMM1/4
€12.67*
PMM1/4
Connection:
vertical
|
Dimension thread ":
G1/4
Convinced...is usually only clear when you can see it. You can display the vacuum here. The handy PMM1/8 (class 2.5) fits all vacuum products with a 1/8” connection.Housing materials: plastic/brass
Variants from €12.14*
Miniature vacuum cleaner VC064S
€0.00*
VC064S
Price on request
Durchmesser D in mm:
6,4
|
Material:
Silicone transparent
No annoying fiddling...With our handheld suction cup, very small parts such as screws, balls, springs, washers, etc. can be precisely positioned manually. There is a needle on the suction cup to which one of our miniature suction cups is attached. By closing the opening with the index finger, the suction air can be turned on and off. Vacuum generation is controlled by connecting a vacuum generator.
Oval suction rubber SOT06
€23.68*
SOT06
Abmessung (LxB):
6 x 18
|
Material:
HighTemp HT
Oval suction cups are ideal for long profiles, pipes and workpieces with bars or grooves between many holes. The ear clamp supplied fixes the suction cup in place and prevents the suction cup from twisting and sucking in any air. The oval suction pads are available in oil-resistant Perbunan (NBR, black), temperature-resistant food-safe silicone (up to +200 °C, white transparent). The blue version HT (high-temperature material) is particularly low-marking and is especially suitable for plastics, oily surfaces and porous materials from stone to wood. The suction pads are simply attached to the adapter or vacuum generator and fixed in place with the ear clamp supplied.
Variants from €4.11*
Silencer ST16C
€0.00*
ST16C
Price on request
It hisses...when compressed air is released. The remedy is the silencer. The exclusive “whisper silencers” made of nylon or aluminum reduce the noise level to a more pleasant level.
The aluminum version is open throughout and enables the transport of solid and liquid media.Miscellaneous:All data measured at: 5.5 bar operating pressure - Operating temperature: -10 °C...+80 °C
Silencer ST4
€0.00*
ST4
Price on request
It hisses...when compressed air is released. The remedy is the silencer. The exclusive “whisper silencers” made of nylon or aluminum reduce the noise level to a more pleasant level.
The aluminum version is open throughout and enables the transport of solid and liquid media.Miscellaneous:All data measured at: 5.5 bar operating pressure - Operating temperature: -10 °C...+80 °C
Spring plunger FED-M510-SV
€64.26*
FED-M510-SV
Plunger stroke:
10
|
Thread:
M5
|
Variant:
Standard spring plunger with anti-twist protection
These standard spring plungers can be used for tolerance compensation for workpieces of different heights (up to 75 mm) (S versions). These fit all adapters with an internal thread (SI adapter). For heavier loads, we recommend the high-quality versions (H versions) with a stable plain bearing and smoothed plunger rod for gentle contact with sensitive workpieces. As an option, we can supply the spring plungers incl. anti-rotation lock for use with oval suction cups (V versions). Please add “V” to the order.These standard spring plungers can be used for tolerance compensation for workpieces of different heights (up to 75 mm) (S versions). These fit all adapters with an internal thread (SI adapter).For heavier loads, we recommend the high-quality versions (H versions) with a stable plain bearing and smoothed plunger rod for gentle contact with sensitive workpieces.As an option, we can supply the spring plungers incl. anti-rotation lock for use with oval suction cups (V versions). Please specify order suffix “V”.Order example for anti-rotation variant: FED-1825-HV
Variants from €48.49*
Suction cup lifting cylinder HZ20-100-18V
€196.35*
HZ20-100-18V
Connection thread:
G1/8"
|
Stroke:
100
|
Vacuum generator:
with vacuum generator
Suction cup lifting cylinders - HZ20 seriesThe suction cup lifting cylinder...is a simple and cost-effective component with a lot of automation potential.It is secured against twisting and has a universal mount for all our suction cup types with 1/8“ or 1/4” external thread connection (SG..., SH..., SO... and SR...).The “V” version already has the vacuum generator integrated.For control purposes, the position of the magnetic piston can be queried via the HZ20-RS reed switches. These can be fixed in the housing groove.
Variants from €0.00*
Hand suction needle HDSNWL18
€0.00*
HDSNWL18
Price on request
NeedleSuitable for the HDS hand vacuum cleanerMaterial: anodized aluminiumSuitable for the HDS hand vacuum cleanerMaterial: anodized aluminium
Silencer ST12C
€0.00*
ST12C
Price on request
It hisses...when compressed air is released. The remedy is the silencer. The exclusive “whisper silencers” made of nylon or aluminum reduce the noise level to a more pleasant level.
The aluminum version is open throughout and enables the transport of solid and liquid media.Miscellaneous:All data measured at: 5.5 bar operating pressure - Operating temperature: -10 °C...+80 °C
Silencer ST24FC
€0.00*
ST24FC
Price on request
It hisses...when compressed air is released. The remedy is the silencer. The exclusive “whisper silencers” made of nylon or aluminum reduce the noise level to a more pleasant level.
The aluminum version is open throughout and enables the transport of solid and liquid media.Miscellaneous:All data measured at: 5.5 bar operating pressure - Operating temperature: -10 °C...+80 °C