Minimal atomizer ZMIN-V60
Downloads
Minimal atomizer - ZMIN-V60
“The micro-fine oil film”
This developed atomizer is simple and easy to set up so that it always works. With its compact design (95 x 35 x 32 mm), it always finds its place, even when space is tight.
All good things come from above:
The oil is not sucked in, but simply fed in from above. This makes it possible to work with very low air consumption.
The ZMIN minimum atomizer has a built-in fluid shut-off valve. It only switches to flow when compressed air is present and immediately shuts off the fluid supply if the compressed air is interrupted. This simplifies control, as this is only carried out via the compressed air, e.g. using our 3/2-way valve.
The fluid is simply supplied from above (e.g. via a connection to a container). This fluid supply allows the ZMIN to work with very low air consumption.
The spray pattern can be fine-tuned by adjusting the spreading air and liquid throttle.
The higher the proportion of scattering air, the finer the droplet formation.
| Type: | Atomizer with extended nozzle, 60 mm, Minimal atomizer |
|---|---|
| Max. Air consumption at 6 bar [l norm. / min]: | 58 |
| Sound level [dB]: | 75 |
| Operating pressure [bar]: | 5 - 8 bar |
| Temperature min. [C°]: | -25 |
| Temperature max. [C°]: | 80 |
| Material: | Anodized aluminium, NBR, Nickel-plated brass, Seals PTFE + 25 % carbon |
| Viscosity range: | 1 – 150 mm²/sec. bei 20 °C |
| Spray angle: | max. 30° |
| Max. Cycle frequency per min.: | 60 |
| Max. Air consumption [l norm. / min]: | 58 |
| Product number: | ZMIN-V60 |
| EAN: | 4255910800219 |
| Type: | Atomizer with extended nozzle, 60 mm, Minimal atomizer |
|---|---|
| Max. Air consumption at 6 bar [l norm. / min]: | 58 |
| Sound level [dB]: | 75 |
| Operating pressure [bar]: | 5 - 8 bar |
| Temperature min. [C°]: | -25 |
| Temperature max. [C°]: | 80 |
| Material: | Anodized aluminium, NBR, Nickel-plated brass, Seals PTFE + 25 % carbon |
| Viscosity range: | 1 – 150 mm²/sec. bei 20 °C |
| Spray angle: | max. 30° |
| Max. Cycle frequency per min.: | 60 |
| Max. Air consumption [l norm. / min]: | 58 |
| Product number: | ZMIN-V60 |
| EAN: | 4255910800219 |
Ersatzteile ZMIN-V60
1105 Series - L-fitting (MS nickel-plated) 1105-6/4-M5
€2.38*
1105-6/4-M5
Hose inside Ø:
4 mm
|
Hose outer Ø:
6 mm
|
Thread:
M5
1105 Series - L-fitting (MS nickel-plated)Order example 1105-6/4-M5:Outer hose Ø: 6 mmHose inner Ø: 4 mmThread: M5
EZMIN-DS/01ES
€47.01*
EZMIN-DS/01ES
Cylinder with piston without auxiliary toolsCylinder with piston without auxiliary tools for replacement; suitable for ZMIN / ZMIN-V60 / ZMIN-MS
Limiting plate EZMIN-BP
€3.57*
EZMIN-BP
Limiting plateLimiting plate for replacement; suitable for ZMIN / ZMIN-V60 / ZMIN-MS
1020 Series - Straight screw connection 1020-6/4-M5
€1.04*
1020-6/4-M5
Hose inside Ø:
4 mm
|
Hose outer Ø:
6 mm
|
Thread:
M5
1020 Series - Straight screw connectionOrder example 1020-6/4-1/8:Outer hose Ø: 6 mmHose inner Ø: 4 mmThread: G 1/8”
EZMIN-ND/01
€69.02*
EZMIN-ND/01
Nozzle, long versionNozzle, extended or replacement; suitable for ZMIN-V60
EZMIN-DS-ES
€57.83*
EZMIN-DS-ES
Seal kit with piston and auxiliary toolSeal kit with piston and auxiliary tool for replacement; suitable for ZMIN / ZMIN-V60 / ZMIN-MS
Throttle screw NBR EZMIN-DR
€38.08*
EZMIN-DR
Throttle screw NBRThrottle screw with NBR seals; suitable for ZMIN / ZMIN-V60 / ZMIN-MS
Metal hose EZMIN-MS
€101.75*
EZMIN-MS
Metal hoseMetal hose mounted for retrofitting or replacement suitable for ZMIN-MS.
Accessories ZMIN-V60
Hose S-PUN4
€1.33*
S-PUN4
Inner diameter:
4
|
Material:
Pneumatics transparent
|
Outer diameter:
6
Hoses made of PA, PU, PVC
Variants from €0.77*
Hose S-PVC4
€0.77*
S-PVC4
Inner diameter:
4
|
Material:
PVC transparent
|
Outer diameter:
6
Hoses made of PA, PU, PVC
B03EH
€48.79*
B03EH
Universal containerOur containers are made of hard polyethylene PE-HD and soft polyethylene PE-LD. These are ideal for use with alcohols, alkalis, glycols, mineral oils, lubricating oils and acids.
Universal container B01R/01
€24.87*
B01R/01
Universal containerOur containers are made of hard polyethylene PE-HD and soft polyethylene PE-LD. These are ideal for use with alcohols, alkalis, glycols, mineral oils, lubricating oils and acids.
Universal container B
€123.76*
B
Universal containerOur containers are made of hard polyethylene PE-HD and soft polyethylene PE-LD. These are ideal for use with alcohols, alkalis, glycols, mineral oils, lubricating oils and acids.
Hose S-PU4
€1.31*
S-PU4
Inner diameter:
4
|
Material:
Pneumatics black
|
Outer diameter:
6
Hoses made of PA, PU, PVC
Variants from €0.77*
Verwandte Produkte ZMIN-V60
Minimal atomizer ZMIN-MS
€454.58*
ZMIN-MS
Minimal atomizer - ZMIN-MS“The micro-fine oil film”This developed atomizer is simple and easy to set up so that it always works. With its compact design (95 x 35 x 32 mm), it always finds its place, even when space is tight.All good things come from above:
The oil is not sucked in, but simply fed in from above. This makes it possible to work with very low air consumption.
The ZMIN minimum atomizer has a built-in fluid shut-off valve. It only switches to flow when compressed air is present and immediately shuts off the fluid supply if the compressed air is interrupted. This simplifies control, as this is only carried out via the compressed air, e.g. using our 3/2-way valve.
The fluid is simply supplied from above (e.g. via a connection to a container). This fluid supply allows the ZMIN to work with very low air consumption.
The spray pattern can be fine-tuned by adjusting the spreading air and liquid throttle.
The higher the proportion of scattering air, the finer the droplet formation.Minimal atomizZMIN-MS - the mobile one:er - ZMIN-MSThe ZMIN-MS atomizer can be turned and rotated as required thanks to the flexible metal hose.
Minimal atomizer ZMIN
€373.66*
ZMIN
Minimal atomizer - ZMIN“The micro-fine oil film”This developed atomizer is simple and easy to set up so that it always works. With its compact design (95 x 35 x 32 mm), it always finds its place, even when space is tight.All good things come from above:
The oil is not sucked in, but simply fed in from above. This makes it possible to work with very low air consumption.
The ZMIN minimum atomizer has a built-in fluid shut-off valve. It only switches to flow when compressed air is present and immediately shuts off the fluid supply if the compressed air is interrupted. This simplifies control, as this is only carried out via the compressed air, e.g. using our 3/2-way valve.
The fluid is simply supplied from above (e.g. via a connection to a container). This fluid supply allows the ZMIN to work with very low air consumption.
The spray pattern can be fine-tuned by adjusting the spreading air and liquid throttle.
The higher the proportion of scattering air, the finer the droplet formation.